Full-time Associate Professor, Fuzhou University, China, 2019-present

Full-time Assistant Professor, Fuzhou University, China, 2013-2019

Bridge Conceptual Design, Fuzhou University, China

Design and Application of Jointless Bridge, Fuzhou University, China

BIM Modular Design for Road and Bridge, Fuzhou University, China

Civil Engineering Intelligent Planning and Design, Fuzhou University, China

Introduction to Building Information Modelling, Fuzhou University, China

C-level Talents in Fujian Province (2024)

Science and Technology Progress Award (First Prize), Fujian Provincial Highway and Transportation Society (2025)

Jointless Bridge

Soil-structure Interaction

Application of Ultra-high Performance Concrete

Steel-concrete Composite Structure

Temperature Effects on Structures

Principal Investigator: “Mechanism and Calculation Method of Z shaped Approach Slab in Jointless Bridge”, Young Scientists Fund of the National Natural Science Foundation of China (2016-2018)

Principal Investigator: “Design and Application of Jointless Bridges”, Xi'an Highway Research Institute (2020)

Co-Investigator: “Research on Mechanism and Calculation Method of an Innovative Pile Isolation System for Integral Abutment Bridges”, General Program of the National Natural Science Foundation of China (2018-2021)

Member, International Association for Jointless Bridges (IAJB)

Young Editorial Board Member, Journal of Traffic and Transportation Engineering (EI Journal)

Reviewer, Engineering Structures (SCI Top Journal)

Reviewer, Construction and Building Materials (SCI Top Journal)

[1] Junqing Xue, Angelo Aloisio*, Yifei Zhang, et al. Mechanical Behavior of Slender CFST Columns with Debonding under Axial and Eccentric Compression. Journal of Structural Engineering, 2026, 152(2): 04025259. (SCI Q1)

[2] J Xue, A Aloisio*, Z Liu,et al. Phenomenology of moderate interface debonding in concrete-filled steel tubular columns: Experimental and numerical assessment. Engineering Structures, 2025, 343: 120982. (SCI Q1)

[3] J Xue, S Mao, P Cacciola, et al. Improving the mechanical performance of UHPFRC using fiber orientation: Experimental investigation, microstructural analysis, and numerical modeling. Construction and Building Materials, 2025, 476: 141119. (SCI Q1)

[4] J Xue, S Mao, W Xu, et al. Experimental characterization of prefabricated link slabs with randomly oriented and oriented-fibres UHPC under multiple geometric configurations. Engineering Structures, 2025, 323: 119253. (SCI Q1)

[5] J Xue, S Mao, P Cacciola, et al. Experimental evaluation of the effectiveness of fiber orientation methods on the mechanical performance of UHPFRC. Construction and Building Materials, 2024, 448: 138184. (SCI Q1)

[6] J Xue, A Aloisio*, A Contento, et al. A piece-wise linear model for modelling the tension-stiffening effect in steel-reinforced UHPC composites. Composite Structures, 2024, 345: 118373. (SCI Q1)

[7] A Aloisio, D Lavorato, J Xue*, et al. The role of overstrength in welded joints for rebar substitution in damaged RC columns. Construction and Building Materials, 2023, 409: 133952. (SCI Q1)

[8] J Xue, J Huang, A Fiore*, et al. Prediction of the mechanical performance of compressed circular CFST columns with circumferential debonding gap. Journal of Constructional Steel Research, 2023, 208: 107988. (SCI Q1)

[9] J Xue, D Lavorato, A Tarantino, et al. Rebar Replacement in Severely Damaged RC Bridge Column Plastic Hinges: Design Criteria and Experimental Investigation. Journal of structural Engineering, 2023, 149(3): 04023007. (SCI Q1)

[10] A Aloisio, M Pelliciari, J Xue*, et al. Effect of pre-hole filled with high-damping material on the inelastic response spectrum of Integral Abutment Bridges. Journal of Earthquake Engineering, 2023, 27(12): 3319-3340. (SCI Q2)

[11] R Fu, B Briseghella, J Xue*, et al. Experimental and finite element analyses of laterally loaded RC piles with pre-hole filled by damping material in IABs. Engineering Structures, 2022, 272: 114991. (SCI Q1)

[12] M Ferrotto, L Fenu, J Xue*, et al. Simplified equivalent finite element modelling of concrete-filled steel tubular K-joints with and without studs. Engineering Structures, 2022, 266: 114634. (SCI Q1)

[13] S Abid, J Xue*, J Liu, et al. Temperatures and gradients in concrete Bridges: Experimental, finite element analysis and design. Structures, 2022, 37: 960-976. (SCI Q1)

[14] J Xue, A Aloisio*, Y Lin, et al. Optimum design of piles with pre-hole filled with high-damping material: experimental tests and analytical modelling. Soil Dynamics and Earthquake Engineering, 2021, 151: 106995. (SCI Q1)

[15] J Xue, A Fiore*, Z Liu, et al. Prediction of Ultimate Load Capacities of CFST Columns with Debonding by EPR. Thin-Walled Structures, 2021, 164: 107912. (SCI Q1)